How to Build a Dirt Bike Jump? – 5 Steps to Do

Written by

James Stevens

Fact-checked by

Robert A. Verdin

How to Build a Dirt Bike Jump

If you want to learn or develop your dirt bike jumps, practicing is a must. However, learning how to do jumps in the tracks is challenging because other riders also practice there.

Thus, if you want to have a private area where you can ride, such as in your backyard, having your own track is beneficial. Fortunately, it’s very doable if you learn the proper way to build ramps or mounds.

So, if you want to learn how to build a dirt bike jump, continue reading this article!

Steps to Build a Dirt Bike Jump

Step 1: Prepare


  • Shovel and bricks, cinder blocks, or concrete
  • A dirt bike


  • Dirt (sand and clay)
  • Heavy-duty equipment (like a loader)

Learning how to make your dirt bike jump can benefit you in the long run, especially if you want a private place to work on your skills, such as doing a double jump.

To begin your dirt bike journey, check out the detailed steps below!

Step 2: Prepare the location.


If you’re planning to make dirt bike jumps, the first thing you need to consider is the location of the jumps.

For instance, the place should be clear of trees, and the area should be able to accommodate the type of jumps you want to do (usually at least ⅓ of an acre in size).

In addition, choosing a terrain with slants or elevations will help you build the jumps easier.

Another thing to consider is getting the permission of your neighbors or local government to avoid any issues during the building process and when you’re riding.

Step 3: Determine the jump size.


Knowing the jump size you want to build will guide you well in the process. The ratios below are an excellent bike jump calculator, and they can help you determine how much dirt/materials you need and if the area you chose is ideal.

You may want to start with small jumps first if you’re a beginner. In any case, the motocross jump dimensions should have a 3-to-1 ratio. It means that if you want a 3-feet long jump, the height of your jump should be 1 foot.

In addition, if you want to make dirt jumps hard, you can also build supercross-style jump dimensions, wherein the length of the jump is two times its height.

Step 4: Know the kind of materials you need.


Before making your dirt bike jump, you must also determine if you prefer a portable or permanent jump. If you want permanent dirt bike ramps, you’ll have to use dirt and make changes to the land.

For building permanent jumps, you need to identify the best kind of dirt to make them reliable. A mixture of 60% sand and 40% clay is the best because it provides the best traction and a compact surface with sufficient durability.

On the other hand, portable ramps often use wood as their material and screws or nails to secure the planks. Given the focus of our article, we’ll be focusing on dirt jumps here.

Step 5: Build the jump.

Now that you’ve found the best location and your desired jump size, it’s time to work on your motocross jump design.

With heavy-duty equipment


To easily build dirt bike jumps, you can use heavy-duty equipment such as a loader, a wheel skid, or a bulldozer.

First, you want to use your loader to stack the dirt on flat ground until you reach your desired height. After stacking two mounds of dirt, put another mound in the middle and use the truck skid’s bucket to shape the front of the jump.

Finally, drag the bucket back to make the face of the jump smooth.

With a shovel


If heavy-duty equipment is not accessible to you, it’s also possible to build jumps with a shovel! Here’s a step-by-step process.

  • Dig a hole using your shovel until you reach three to four feet deep and two feet wide. Set the dirt aside or put it in a wheelbarrow because you’ll still need it later on.
  • After digging, you can now shape the mound. It’s important to have a solid foundation for your jump, so use cinder blocks, concrete, or bricks.

Once you’ve used these materials to form a mound, cover them with the dirt you removed to create a nice surface for jumping. Pack the dirt tightly and evenly according to your preferred dimension.

However, if you’re building the jump on a slanted surface, simply dig the dirt below the jump and stack it on the jump’s base to shape it.


  • Moreover, to shape the lip, you can roll your dirt bike’s wheels into the ramp or stomp on it with your feet.
  • For finishing touches, you can wet the jumps and pack them even more so that you have a solid and compacted practicing location.

Once the dirt has hardened and dried, you can now test your ramp and make changes if needed.


In summary, learning how to build a dirt bike jump is an interesting and fun experience! Make sure you follow the proper process to save time.

First, find the ideal location for your jumps, determine the dimensions of the jumps you want, and make a layout/plan for easier building.

By following the detailed steps above, you can now construct your own motocross track in your backyard. It’s time to work on those stunts, and we hope you have fun riding!

5/5 - (2 votes)

James Stevens

James Stevens is an expert bike mechanic who knows everything from basic repairs to custom modifications. What sets him apart is his ability to explain complex concepts in a way that's easy to understand. Check out his content on Speedway if you need help with upgrades or modifications for your bike.